SINTERED QUARTZ FURNITURE - PRODUCT INFORMATION
1. KEY ATTRIBUTES OF SINTERED QUARTZ:
* these properties are not guaranteed in the case of polished surface which is more sensitive than other surfaces.
2. CARE AND MAINTENANCE
Table tops made from sintered quartz are cleaned extremely easily. However, for best results follow the instructions given below.
For all the following cleaning operations, it is advisable to carry out tests in advance on a small portion of material using the foreseen cleaning product to make sure that this does not damage the surfaces.
Remember that, generally, it is easier to remove stains when done rapidly. Smears and stains on the surfaces are usually the result of incorrect, in-depth cleaning. Under no circumstances use hydrofluoric acid or products containing hydrofluoric acid.Please follow manufacturer’s guidelines and dilute cleaners when required.
GRAINED AND MAT SURFACES
Daily cleaning
Generally, for everyday cleaning use hot water and neutral detergents if required, with a soft cloth. Follow the instructions given on the detergent package.
Rinse with plenty of water and dry the surface with a soft cloth.
To prevent matt stains, do not use products containing wax.
Stains not promptly removed may leave more or less visible traces on the surface, in accordance with the tolerance of the specific type of finishing.
Intense cleaning
To remove stains or particularly resistant residues from the surface, clean first with hot water and neutral detergent.
If this is not sufficient, use increasingly incisive cleaning techniques and specific products, depending on the stain, including:
After applying the above measures, rinse the surface of the tabletop with water and dry. It is fundamental to comply with the information given in the technical data sheets and product labels. To remove residues of dried materials such as chewing gum use a wooden or plastic scraper and then clean the surface with a mild detergent using a soft sponge or cloth. If the table top is stained with paints or markers, clean it immediately with special detergents, such as: thinner for paints, trichloroethylene, turpentine or other solvent-based detergents. Finally, rinse the table top with plenty of water and wipe it dry. Any permanent traces of graphite or other left by metal items can be removed with the acids used to remove the limestone.
POLISHED SURFACES
Daily cleaning
The ordinary cleaning of above surfaces should be made with water and neutral detergents. Some types of stains, if not removed promptly, can leave visible traces on the polished surface. Should you spill any liquids such as coffee, red wine, tea, etc. immediately dry the surface with an absorbent cloth, without spreading the stain on a larger surface. If the stain remains on the surface for a long time, it will be difficult to remove it completely.
Intense cleaning
Alcohol for domestic use and possibly basic agents (such as bleach) may be used for more stubborn grime, however it is necessary to rinse with plenty of water after using them. Perform the cleaning using a soft sponge dampened with water and detergent, followed by rinsing and drying of the treated surface with a dry cloth to remove any residual dirt or detergent.
Most stains will disappear in 2-3 minutes. Alternatively, you can try applying bleach directly on the surface of the table top. The detergent should be left for no longer than 10 minutes. Then rinse thoroughly with plenty of water and then dry the surface with a cloth. If necessary it is recommended to repeat the activity several times. Bleach must not be left on the surface of the table top for longer than 10 minutes. Acidic products can also be used (such as lime scale remover), acetone or solvents. In the event of an accident, do not use abrasive sponges or materials such as detergents containing abrasive particles. Do not wash with cleaning brushes, metal sponges or any metal tools. Do not use detergents with a strong alkaline pH.
The cleaning recommendations and procedures below are provided for informational purposes only. Always perform a preliminary test on a slab that was not installed or on a portion of the surface located in a hidden area to verify that the methods and products used do not cause damage to the surfaces.
OTHER INFORMATION